What do you do when you buy a NEW TRU cube?
+6
yoingcuber
MetaboringJohnCañares
o0sample0o
kiddy_punk
chaos2121
bonoan1027
10 posters
:: Cuber's Talk :: Speedcubing
Page 1 of 1
What do you do when you buy a NEW TRU cube?
it takes a long time for my new TRU cubes to get loose even after i put lube already. Is there something I'm supposed to do before applying the silicone?
bonoan1027- 3x3x3
-
Number of posts : 566
Age : 30
Location : Katips
Registration date : 2008-03-21
Re: What do you do when you buy a NEW TRU cube?
bro no offense meron na kmi gnwang thread kung anong gagawin mo for a brand new tru or any other cubes like DS yuga and C4U
try mo search hehee sorry po ha no offense tlga just helping
enjoy cubing
try mo search hehee sorry po ha no offense tlga just helping
enjoy cubing
chaos2121- 3x3x3
-
Number of posts : 615
Age : 36
Location : Taguig City
Registration date : 2008-01-10
Re: What do you do when you buy a NEW TRU cube?
sir try niyo po ito, nung nabasa ko na post mo sinearch ko na kagad para sayo ehehehhe
https://pinoyspeedcubers.forumotion.com/noob-s-area-f12/unleashing-the-power-of-your-cube-for-noobs-t3607.htm
baka makatulongsayo yan, next time po search muna halos lahat na kasi andyan na po eh, sana me tulong yan link eheheh, Happy Cubing Salamat...
https://pinoyspeedcubers.forumotion.com/noob-s-area-f12/unleashing-the-power-of-your-cube-for-noobs-t3607.htm
baka makatulongsayo yan, next time po search muna halos lahat na kasi andyan na po eh, sana me tulong yan link eheheh, Happy Cubing Salamat...
kiddy_punk- 2x2x2
-
Number of posts : 376
Age : 40
Location : Sagad, Pasig City
Registration date : 2008-01-15
Re: What do you do when you buy a NEW TRU cube?
nice thnx kiddy punk for the link sna tma ung sinabi ko sau bonoan hahah
just helping po hehehehe
just helping po hehehehe
chaos2121- 3x3x3
-
Number of posts : 615
Age : 36
Location : Taguig City
Registration date : 2008-01-10
Re: What do you do when you buy a NEW TRU cube?
nako..
parehas ata problem ntin sa TRU cube (i bought it for 219.75php)...
kahit po inisprayan ko na ng cyclo
(nilunod ko na nga sa silicone eh.. )
ni hindi ko pa rin makalas...
aus lng..
pang display nlng po cguro muna...
parehas ata problem ntin sa TRU cube (i bought it for 219.75php)...
kahit po inisprayan ko na ng cyclo
(nilunod ko na nga sa silicone eh.. )
ni hindi ko pa rin makalas...
aus lng..
pang display nlng po cguro muna...
Re: What do you do when you buy a NEW TRU cube?
I'm going to lube it then sell it for a higher price.
Re: What do you do when you buy a NEW TRU cube?
yung friend q po, pinakinis niya po yung surface ng TRU cube nya, he used sand paper, tapos parang naging DIY yung cube nya, ganda gamitin,.
yoingcuber- 2x2x2
- Number of posts : 18
Age : 33
Registration date : 2008-03-08
Re: What do you do when you buy a NEW TRU cube?
ayos kiddy punk inadvertise ba nmn thread ko??? ahahah. kuya bonoan check mo ung link ni kiddy punk
Re: What do you do when you buy a NEW TRU cube?
when i still didn't have my DIY, here's what i do after i buy a TRU cube:
1. i apply nail polish at once to preserve the stickers
2. once the stickers are dry (overnight), i sand the inner surfaces my cube using a sand paper or a silica sand. after sanding, i brutally play with the cube for one whole day without lube yet.
3. then, i disassemble the cube, clean it, assemble it, then play with it (3x)
4. once the cube is clean, i apply lube.
actually, for the past few days, i've been using a really old TRU cube, it's really good when i practice slow solves. plus, it NEVER pops. since it's old, it doesn't have any more lock ups and it cuts as good as diy's.
1. i apply nail polish at once to preserve the stickers
2. once the stickers are dry (overnight), i sand the inner surfaces my cube using a sand paper or a silica sand. after sanding, i brutally play with the cube for one whole day without lube yet.
3. then, i disassemble the cube, clean it, assemble it, then play with it (3x)
4. once the cube is clean, i apply lube.
actually, for the past few days, i've been using a really old TRU cube, it's really good when i practice slow solves. plus, it NEVER pops. since it's old, it doesn't have any more lock ups and it cuts as good as diy's.
Last edited by pajodaep on Thu May 15, 2008 12:52 am; edited 1 time in total
pajodaep- 3x3x3
-
Number of posts : 781
Age : 39
Registration date : 2007-07-16
Re: What do you do when you buy a NEW TRU cube?
@pajodaep
brian uy told me to do the same thing you said:))
brian uy told me to do the same thing you said:))
bonoan1027- 3x3x3
-
Number of posts : 566
Age : 30
Location : Katips
Registration date : 2008-03-21
Re: What do you do when you buy a NEW TRU cube?
MaZtR HaXoR wrote:ayos kiddy punk inadvertise ba nmn thread ko??? ahahah. kuya bonoan check mo ung link ni kiddy punk
eheheh nice link yun eheheheh sana sa sticky na din siya mapunta kaso mukhang di naman napansin ni bonoan eheheheheh...salamat
@chaos
welcome and salamat ahahahaha
kiddy_punk- 2x2x2
-
Number of posts : 376
Age : 40
Location : Sagad, Pasig City
Registration date : 2008-01-15
Re: What do you do when you buy a NEW TRU cube?
i prefer the cube not to be sanded... it gives a weird feeling and didnt seem to help my old japan rubik's cube at all...
i wished i hadn't sandpaper-ed it
i wished i hadn't sandpaper-ed it
Re: What do you do when you buy a NEW TRU cube?
i think it depends on the cube. i don't sand my diy. but i sand my tru cube coz it really needs it.
pajodaep- 3x3x3
-
Number of posts : 781
Age : 39
Registration date : 2007-07-16
Re: What do you do when you buy a NEW TRU cube?
TRU cube need to be sanded... sand paper or literally... the sand...
pero mga TRU cubes na lumalabas ngayon is almost for speed cubing... it really is smooth... but not all... luckily for me... i bought one that not needed any sand... just break-in for about an hour... then clean the cube... then apply some lube... VIOLA... it is for speedcubing... but the cutting corners is not that effective... but if you use it as a main cube... baka after a week or two... okay na for cutting corners...
BTW... i'm talking about a SHRINK WRAPPED TRU CUBE... P219.00...
thanks a lot... heheheheheheh... :D:D:
pero mga TRU cubes na lumalabas ngayon is almost for speed cubing... it really is smooth... but not all... luckily for me... i bought one that not needed any sand... just break-in for about an hour... then clean the cube... then apply some lube... VIOLA... it is for speedcubing... but the cutting corners is not that effective... but if you use it as a main cube... baka after a week or two... okay na for cutting corners...
BTW... i'm talking about a SHRINK WRAPPED TRU CUBE... P219.00...
thanks a lot... heheheheheheh... :D:D:
TheJoker- 3x3x3
- Number of posts : 721
Age : 53
Registration date : 2008-02-02
Similar topics
» paano po malalaman kung YUGA cube ang isang rubiks cube???
» Ano ba pede itawag sa cube na toh... MAVY CUBE ahaha
» Cube Engineering: Quest for the Perfect Cube Mechanism
» Rubik's Cube - 3x3x3 Idiot Cube
» anu mas maganda? TRU cube? , DIY cube? , o RUBIK'S STUDIO?
» Ano ba pede itawag sa cube na toh... MAVY CUBE ahaha
» Cube Engineering: Quest for the Perfect Cube Mechanism
» Rubik's Cube - 3x3x3 Idiot Cube
» anu mas maganda? TRU cube? , DIY cube? , o RUBIK'S STUDIO?
:: Cuber's Talk :: Speedcubing
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|