Unleashing the power of your cube [For Noobs]

Hey guys, i think this should be in Noob's area so that they will know. Ok?

So let's start...

*For Rubik's cubes (TRU) - First, Break-in the cube so that it will become smoother, Break-in means you should turn all sides one by one until it becomes smooth or "madulas", then after Breaking-in you should spray silicone (CYCLO or Mag 1 siliconE) inside then it will become smoother. Optional: You can also sand (kakaskasin ng liha) the inside part of the cubies if you want before spraying silicone.

***(from chaos2121) For Rubiks DIY kit- parang ung sinbi ni haxor all about tension tpos lube mo na ganon lng TADAN!! sobrang smooth pero if you want to have a great cutting corners u need to break-in hahaaha aun lng kung may mali pa at kulang padagdag nlng

*For Dian Sheng cubes (DS) - First, replace the stickers so that colors will last long, and after replacing the stickers, spray some silicone inside the cube, after that open up one center cap and adjust it a little, I suggest you should adjust the yellow center cap if you make your cross at the white side and vice versa. *Optional* You may also change the srew set of the cube using the screw set of a Cube4you(C4Y) DIY cube

*For Clown Cubes - The same way in Rubiks' cubes (TRU) Sadly, As my sources said, (NYAHAHAHA SI KUYA OMAR TO HEHEH) low quality daw mga clown cubes ngaun.

**For Yuga cubes (UDIY) - Just spray Silicone inside, no need to break-in.

**For DIY cubes (C4Y) - First assemble it ( of course!!! duh ) then you must get the tension suited for your cubing style. after that apply the stickers (DUH!!!) then just spray silicone inside.

NOTE:

* = Cubes that is suitable for Ultra High Speed Cubing (more on force)
** = Cubes that is suitable for Slow solves (more on look ahead)
*** = Cubes that is suitable for Slow solves and Ultra High Speed Cubing (Choice mo na yan.)

That's it!!!

@ Mods, Members: kung mai gusto po kayong idagdag just post it here. ndi ko pa po nilagyan ng Rubiks 2x2 - 5x5 and ES 2x2 - 5x5 kasi ndi pa po ako sure.

Ginanahan lang po ako mag post e...

If you want to add something post in proper way

like this:

For _____ cubes - blahblahblah blah blah blah...

Because I want this thread to be Organized.

If you Want to ask questions ask it here. (don't PM me because bihira ako mag check ng messages hehehehe)

Hope this helps...

ask ko lang tol yun sa DS kung palitan ko kaya ng screw at core galing sa c4u? mas gaganda po ba? salamat......

sorry po d ko pa po nasusubukan aheheheheheh. pero pag ginawa mo yang ginawa ko maganda na DS mo. heheheh

FIY ung DS ko ung main cube ko ngaun hehehehhe

ahhh ganun ba ehehhehe ti nry ko na gumanda nga DS ko bale yun isa DS ko nlng experiment ko bout sa core and screw ng C4u eheheheh salamat sa info master....eheheheh bilis reply ahh

ahehhehe ako pa laging online ito noh hehehhe.. enge nmn YM mo. parang ambilis mo ata nagawa yang sa DS mo? hehhehe

@kiddy_punk try mo palitan ako pinalitan ko ok namn ganon din anmn eh wlang ngbago ung nga lng tension na iba hahahaha

For Rubiks DIY kit- parang ung sinbi ni haxor all about tension tpos lube mo na ganon lng TADAN!! sobrang smooth pero if you want to have a great cutting corners u need to break-in hahaaha aun lng kung may mali pa at kulang padagdag nlng

cge dagdag ko nlng yan ampuge ng pic ni chaos ahahah

Plan ko rin na palitan yung core and screwset ng DS ko eh, kasi ampanget na. Hehe, pero ok naman? Lumuwag ba or what?

MaZtR HaXoR wrote:ahehhehe ako pa laging online ito noh hehehhe.. enge nmn YM mo. parang ambilis mo ata nagawa yang sa DS mo? hehhehe

eheheh nung nabasa ko kasi tong topic mo sakto naggagawa na ako ng DS ko nka baklas na lahat ng center cap then sakto nakita ko ito ayun dali ganda eheheh salamat...

add me sir evad_122601@yahoo.com

salamat ehehhe


@chaos
try ko sir pag nkuha ko order ko ke kuya jonathan eheheh ask ko lang pag napalitan ko na ng core at screw di ba magiging poppers cube ko ehehehh salamat...

Update: added rubik's DIY kit from chaos

@MaZtR HaXoR: pede paki elaborate kung bakit suitable for ultra highspeed, slow solve, or both? kasi surely me pros and cons parin sila diba? at kung exactly the same sila, eh di nag mistulang same brand na diba?


*dagdag ko lang*
sa 'dami' ng nabili ko na clown cubes, napansin ko na lately bumababa ung quality niya, like ung sa isa kong clown cube, nag pop, nung binuksan ko ung center caps niya. paling ung spring. naka labas siya. tapos ung screws naman nung iba hindi na ka sagad. Hope this helps.

edit: additional kung break in ninyo, tpos i-lube don't use pet.jelly for DS, na-loose siya, like nag twist ung corners..

@threadstarter: pasensya medyo na curious din kasi ako eh, saka helpful ang ganitong thread for those na nag babalak na bumili ng cubes.

regarding UDIY/YUGA, inuudjust din ung screws nun para gumanda. usually ginagawa ko is ung opposite colors (yellow, white) then aun na. no need to break in.

w0w nice thread!!!!

sourcefull tlaga cya sa mga cubers na may ibet ibang cube!!

nice thread,, basta makapgcube ok na khit walang nang stickers yung cube

@ omar kuya ung nilagay ko lang jan ay based po sa experience ko heheh. ung clown cube po kasi suitable for high speed kasi po pag relax na pitik ndi mo po mapapaikot sa tigas ehehhe. na try ko rin po buksan ung center cap nung clown. pangit nga springs nakalabas rin heheh.

kmcruz09 wrote:Plan ko rin na palitan yung core and screwset ng DS ko eh, kasi ampanget na. Hehe, pero ok naman? Lumuwag ba or what?

ako kuya nagpalit n ako ng core ng ds ko.... kasi na loss n yung thread nya... pero ds core p rin ang pinalit ko.... yung screwset nya wag mo n palitan linisin m n lng....maganda nmn yun esp. yung springs nya... khit medyo kalawangin ang dating nya ehh malambot p rin.... un lng...



na try nyo n bang putulin ang springs nyo??? grabe.... todo n yung pagkakahigpit ko sa tension pero smooth p rin... ginawa ko pala yun para iwas POP... may konting "lock-up" minsan... pero naiiwasan naman basta accurate lng yung pag flick mo...

i think this should be stickied para alam ng noobs tsaka para d mawala sa front page ng noobs area

Nice guide, complete with legends... I think it would be nicer if you sited on some links of videos available showing how to do this things and so it can be an ultimate nood guide... Others might not even know how to open that damn cube,, right? haha..

ahahah oo nga noh cge pag may tym hanap ako vids and tuts heheheh

*POST UPDATED DS CUBES* nyahahhaha o ayan ha ndi ako nag double post

thx sa thread!...ginawa nung friend ko ung sinabi mo tungkol sa TRU cube...tas ngaun ang ganda na..hehe...pro sabi nia ang hina pa rin ng ikot...pro ok na un para sa kin...hm...^^...

ganun talaga un dotdotdot, iba iba lahat tayo it depends on ur self.


BTW updated First Post