Help naman po sa Blindfold solve "edge orientation/perm
+3
hopelessvain
benjediman
mrvivi80
7 posters
:: Cuber's Talk :: Blindfold Cubing
Page 1 of 1
Help naman po sa Blindfold solve "edge orientation/perm
hehehe help naman po,. pano nio po nagagawa yung pag orient/permute ng edge at the same time ka c nung ginagawa ko yung T-perm and J1-2perm.. yung edge indi po nka orient yung color niya kya nagpaparity cla,yung ibang color lang nasa tamang ikot ang kulay
Re: Help naman po sa Blindfold solve "edge orientation/perm
dude what method yan? if its the pochmann method (which does permute and orient at the same time) then the orientation of the cubies would depend on how you do the setup moves. just go to solvethecube.co.uk, there you'll find thesetup moves you need for each (take note, UL is different from LU, that's where you find out what orientation you need. LU means the L part will be on the top layer; UL means the U will STILL be on the top layer). I tried copying and pasting it here but it went all wrong
this is the method which i also use, since its so easy, you only need to memorize once per cubie. the next step to get faster is to learn pochmann's M2 R2 method, which is harder but with the same concept as this cube on and good luck!
this is the method which i also use, since its so easy, you only need to memorize once per cubie. the next step to get faster is to learn pochmann's M2 R2 method, which is harder but with the same concept as this cube on and good luck!
benjediman- 2x2x2
- Number of posts : 328
Registration date : 2007-07-03
Re: Help naman po sa Blindfold solve "edge orientation/perm
i had read pochmann's method. but i didn't get it much. haha!
i only use 2cycle method for now. maybe start learning 3cycle next month.
i only use 2cycle method for now. maybe start learning 3cycle next month.
hopelessvain- 2x2x2
-
Number of posts : 387
Age : 34
Location : General Trias, Cavite
Registration date : 2007-07-19
Re: Help naman po sa Blindfold solve "edge orientation/perm
that's pochmann's alright. Grabe improve na kyo ha, inde ko nga alam paano yan.
Re: Help naman po sa Blindfold solve "edge orientation/perm
ang alam ko po halos parehas lang po yun sa 2cycle method ang ikinapangit lang nun!! yung orienation ng corner is napakahaba ng algo di katulad ng R'D'DRx2 super ikli!! ..kaya pumunta ako sa pjkcubeb.com ang iba lang is sa permutation ng edge walang J-permutation 1 and 2 para san kaya un.. Jpermute eh kung mewon namng t-permute
nkapagsolve nga lang ako kaso ma tingin hehe... alanganin kasi ako sa mga edges.. di ko alam tlga kung san tlga yung , mga incorrect orient
nkapagsolve nga lang ako kaso ma tingin hehe... alanganin kasi ako sa mga edges.. di ko alam tlga kung san tlga yung , mga incorrect orient
Re: Help naman po sa Blindfold solve "edge orientation/perm
mrvivi80: bakit po ganun? ung R'D'DR, bumabalik lang sa dati.. hehe.. tinry ko pa xa.. waah! (pero parang binabalik nga lang?)
rico- 2x2x2
-
Number of posts : 101
Age : 38
Location : bulacan
Registration date : 2008-01-05
Re: Help naman po sa Blindfold solve "edge orientation/perm
i think it should be (R'D'RD)x2. iyan ung nasa site ni macky.
Zeinest815- 2x2x2
-
Number of posts : 190
Age : 34
Location : Quezon City
Registration date : 2007-07-03
Re: Help naman po sa Blindfold solve "edge orientation/perm
aahh... un ba ung tinatawag na 3 cycle method? 3 gumalaw sa edge, pero umikot ung 4 corners.. 2 clockwise at 2 counter clockwise..
eh diba pang blindfold un? dapat malaman mo din ung ikot nun sa isip mo? waaah!!
parang imposible para sakin magawa un ah.. hehe
galing nyo..
eh diba pang blindfold un? dapat malaman mo din ung ikot nun sa isip mo? waaah!!
parang imposible para sakin magawa un ah.. hehe
galing nyo..
rico- 2x2x2
-
Number of posts : 101
Age : 38
Location : bulacan
Registration date : 2008-01-05
Re: Help naman po sa Blindfold solve "edge orientation/perm
vic, kung pochmann yan. yayariin mo sa setup moves yung orient/permute niyan. pero kung 2 cycle or three cycle yan. baka di mo na orient kaya nagkaganun.
Similar topics
» Help sa edge orientation
» patulong po sa edge orientation plzz...
» help po sa edge orientation rules nd restrictions
» edge orientation brief explanation for blindsolving
» paturo naman po ng blindfold ohh
» patulong po sa edge orientation plzz...
» help po sa edge orientation rules nd restrictions
» edge orientation brief explanation for blindsolving
» paturo naman po ng blindfold ohh
:: Cuber's Talk :: Blindfold Cubing
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|