Cube becomes sticky with silicon spray??
+8
hail-Lee
eaU^
omarismyname
luigiyotoko
testing101
thirdrecords
sirlawrencearabia
tseng_cube
12 posters
:: Cuber's Talk :: Noob's Area
Page 1 of 1
Cube becomes sticky with silicon spray??
hi guys,,
Just want to ask about sa paglubricate ng cube... Nagtry kasi akong bumili ng Silicon spray then apply sa cube ko. Pero instead na bumilis ang ikot parang lalong naging sticky.. lalong bumagal ang ikot.. bakit ganun? advise nmn guys.. mali ba nabili kong Silicon spray?
Just want to ask about sa paglubricate ng cube... Nagtry kasi akong bumili ng Silicon spray then apply sa cube ko. Pero instead na bumilis ang ikot parang lalong naging sticky.. lalong bumagal ang ikot.. bakit ganun? advise nmn guys.. mali ba nabili kong Silicon spray?
tseng_cube- 2x2x2
- Number of posts : 68
Age : 39
Registration date : 2008-01-19
Re: Cube becomes sticky with silicon spray??
My nilagay ka na bang inang lubricant like petroleum jelly or ibang lube? pag meron...lalagkit talaga yan pero kung ung silicon lang...baka naman sobrang dami or di pa sya masyadong tuyo.
sirlawrencearabia- 2x2x2
-
Number of posts : 226
Age : 41
Location : Pasay City
Registration date : 2008-02-27
Re: Cube becomes sticky with silicon spray??
tseng_cube wrote:hi guys,,
Just want to ask about sa paglubricate ng cube... Nagtry kasi akong bumili ng Silicon spray then apply sa cube ko. Pero instead na bumilis ang ikot parang lalong naging sticky.. lalong bumagal ang ikot.. bakit ganun? advise nmn guys.. mali ba nabili kong Silicon spray?
bro' wrong section po ito.. btw.. its "SILICONE" spray not silicon magkaiba po kasi yun.. for the brand nman its "CYCLO SILICONE SPRAY" po tested..hmmm.. pag nagspray ka kasi ng silicone sa cube mo as in yung kakaispray mo lang talagang sa umpisa mejo malagkit yan pero habang tumatagal lalong gumaganda at umeepekto yung lube sa cube mo at gumanda siyempre ang turns mo dahil sa lube....
hope this helps..
Re: Cube becomes sticky with silicon spray??
minsan ganyan talaga pag nasobrahan.. hmm.. para kasing floor wax yan.. eto gawin mo, baklasin mo uli yung cube mo and punasahn mo ng basahan lahat ng cubies para maging malinis then assemble uli.. then try mo na uli magcube..
testing101- 2x2x2
-
Number of posts : 263
Age : 34
Location : manila
Registration date : 2008-01-31
Re: Cube becomes sticky with silicon spray??
I think more people will help if you mention which cube did you lube and what brand is the silicone.
well, this is exactly what happened to me, this is what I did
1.sand cube
2.break in for 2 weeks
3.lube
hope this helped
well, this is exactly what happened to me, this is what I did
1.sand cube
2.break in for 2 weeks
3.lube
hope this helped
Re: Cube becomes sticky with silicon spray??
baka overlubed. o kaya kung walang lube dati yung cube mo tapos mejo gamit na may mga powedered particles na ng plastic yan sa loob, paghumalo sa lube lumalagkit yun
omarismyname- 2x2x2
-
Number of posts : 185
Age : 42
Registration date : 2008-05-29
Re: Cube becomes sticky with silicon spray??
i think overlube k lng tol .... ska tol inde SILICON SPRAY
dapat SILICONE SPRAY..
if overlube yan try mo patiyuin muna or gamitin mo muna ng gamitin pra mag spread ng maaus ung lubericant sa cube mo.
saka depende din nmn sa cube na nilube mo ehh. may mga cube na sticky after lubing tlga..
pero kung SILICONE SPRAY ang ginamit mo wag kng matakot overlube k lng.
"WRONG SECTION KA TOL "
dapat SILICONE SPRAY..
if overlube yan try mo patiyuin muna or gamitin mo muna ng gamitin pra mag spread ng maaus ung lubericant sa cube mo.
saka depende din nmn sa cube na nilube mo ehh. may mga cube na sticky after lubing tlga..
pero kung SILICONE SPRAY ang ginamit mo wag kng matakot overlube k lng.
"WRONG SECTION KA TOL "
eaU^- 3x3x3
-
Number of posts : 727
Age : 35
Location : San miguel Bulacan
Registration date : 2008-01-16
Re: Cube becomes sticky with silicon spray??
tseng_cube wrote:hi guys,,
Just want to ask about sa paglubricate ng cube... Nagtry kasi akong bumili ng Silicon spray then apply sa cube ko. Pero instead na bumilis ang ikot parang lalong naging sticky.. lalong bumagal ang ikot.. bakit ganun? advise nmn guys.. mali ba nabili kong Silicon spray?
a few questions:
what brand did you buy?
is it silicon or SILICONE?
did you clean the pieces of your cubes before lubricating it?
-cyclo,mag1,crc,3 in one are some brand most cubers use.
-it must be SILICONE with "E"..
-you should clean the cubies thouroughly before applying silicone or else it won't have an effect to your cube's performance..it might even make your cube stiffer...
... and oh, try wiping the cubies a bit after lubricating.
hope this helps.
~freehugs~
Re: Cube becomes sticky with silicon spray??
Hi guys, thanks for your comments..
Eto mga naging problema and solutions:
I applied it sa lumang rubik's cube ko, ayun lalong nging sticky, pero i think dahil yun sa petroleum jelly na nilagay ko,, pinunasan ko then apply ulit ng silicon,, ok na..
Then I applied din sa 4x4 na eastsheen, sumikip ang ikot.. I found out may mga dust particles nga, disassembled ko then pinunasan ko yung pieces... ok na din..
I also applied sa white DS 3x3, ang lupet super duper dulas..
But confused lang ako.Silicon Spray (without "E") yung nabili ko sa Ace Hardware, MR. Mckenic ang brand name.
Magkaiba ba talaga yun?( Silicon and Silicone?)
Eto mga naging problema and solutions:
I applied it sa lumang rubik's cube ko, ayun lalong nging sticky, pero i think dahil yun sa petroleum jelly na nilagay ko,, pinunasan ko then apply ulit ng silicon,, ok na..
Then I applied din sa 4x4 na eastsheen, sumikip ang ikot.. I found out may mga dust particles nga, disassembled ko then pinunasan ko yung pieces... ok na din..
I also applied sa white DS 3x3, ang lupet super duper dulas..
But confused lang ako.Silicon Spray (without "E") yung nabili ko sa Ace Hardware, MR. Mckenic ang brand name.
Magkaiba ba talaga yun?( Silicon and Silicone?)
tseng_cube- 2x2x2
- Number of posts : 68
Age : 39
Registration date : 2008-01-19
Re: Cube becomes sticky with silicon spray??
tseng_cube wrote:Hi guys, thanks for your comments..
Eto mga naging problema and solutions:
I applied it sa lumang rubik's cube ko, ayun lalong nging sticky, pero i think dahil yun sa petroleum jelly na nilagay ko,, pinunasan ko then apply ulit ng silicon,, ok na..
Then I applied din sa 4x4 na eastsheen, sumikip ang ikot.. I found out may mga dust particles nga, disassembled ko then pinunasan ko yung pieces... ok na din..
I also applied sa white DS 3x3, ang lupet super duper dulas..
But confused lang ako.. Silicon Spray (without "E") yung nabili ko sa Ace Hardware, MR. Mckenic ang brand name.
Magkaiba ba talaga yun? ( Silicon and Silicone?)
feel free to correct me if I'm wrong guys.. ^^,
This is what I know...
BOTH silicon and silicone are lubricants...
however, if you are lubricating plastics, it is advisable that you use siliconE..
I'm not sure what's the effect of silicoN to plastics though..
but to be on the safer side, i suggest that you use siliconE for cubers proved that this one is safe for plastics.
"lube at your own risk"
that's what i know..
~freehugs~
oh by the way, you posted in the wrong section.. you should've posted this to the NOOBS AREA. this will be moved..
Re: Cube becomes sticky with silicon spray??
tseng_cube,umm wak lang maxdo dami ng spray kasi di na lahat ng skin ng cubes ngyun ganun.tgnan mo DS mo ok na ok pero TRU d(mali ba ko),diba?ung luma na TRU sobrang ok mejo madame lube dun kaso mtgal before maging ok,mga 15 mins or 20 mins na dercho derecho lng then un,tpos hayaan mo mga 1 hr and try nlng ulit... lml
DRAX- 2x2x2
- Number of posts : 67
Age : 35
Registration date : 2008-09-03
Re: Cube becomes sticky with silicon spray??
try to spray in a moderate supply of silicone next time... pero try setting aside for a day or two... that might do the trick.
julz0716- 2x2x2
-
Number of posts : 274
Age : 31
Location : quezon city
Registration date : 2008-05-14
Re: Cube becomes sticky with silicon spray??
thanks guys!
ok na mga cube ko,, you helped me a lot....
ok na mga cube ko,, you helped me a lot....
tseng_cube- 2x2x2
- Number of posts : 68
Age : 39
Registration date : 2008-01-19
Re: Cube becomes sticky with silicon spray??
ganyan talaga.. antayin mo lang antayin mo lang matuyo......gamitin mo lang ng gamitin
napster14- 2x2x2
-
Number of posts : 73
Age : 34
Location : tonndo,manila
Registration date : 2008-02-29
silicon spray sa cebu?
naay silicon spray dinhi sa cebu? asa ug tag pila? hehe.ty
vanheart45- 2x2x2
- Number of posts : 5
Age : 34
Registration date : 2008-04-16
Similar topics
» SILICONE SPRAY
» MC kenic's silicon spray.... recommended ba???
» WHERE TO BUY RUBIK'S CUBE?? SILICONE SPRAY??
» 3 in 1 Professional Silicone Spray - nakakasira ng CUbe!!
» pde po ba silicon oil ilagay sa rubiks?
» MC kenic's silicon spray.... recommended ba???
» WHERE TO BUY RUBIK'S CUBE?? SILICONE SPRAY??
» 3 in 1 Professional Silicone Spray - nakakasira ng CUbe!!
» pde po ba silicon oil ilagay sa rubiks?
:: Cuber's Talk :: Noob's Area
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|