method na hindi kailangan ng cross

meron po ba nun share nyo naman po thx

petrus method is one pero dun yata based yung extended cross (correct me if i'm wrong ) then roux method, then corner's first, then yung heise method. meron pa ba?

isearch mo na lang kung pano yung mga yan pero i believe to master the first two methods that i mentioned, you need to learn F2L (either intuitive or memorizing).

heto ate makakatulong sa mga tinatanong mo.

http://en.wikibooks.org/wiki/How_to_solve_the_Rubik%27s_Cube

@ ynajatrice

hindi po ata extended cross ang petrus method kasi iyon ang ginagamit konbg method... corners first un... albeit the last layer sometimes is oriented in cross....

^_^

roux method?
heise method?

jestoni143 wrote:@ ynajatrice

hindi po ata extended cross ang petrus method kasi iyon ang ginagamit konbg method... corners first un... albeit the last layer sometimes is oriented in cross....

ganun ba yun? hmm...
tnx sa correction
heheh

van21691 wrote:roux method?
heise method?

roux - build a 3x2x1 block, build the opposite 3x2x1 block, orient and permute top layer corners, orient and permute top layer edges and other center pieces (hnd naman gumagalaw yung center pero naaayos xa hehehe)

heise - d ko maexplain yung method pero gagawa ka ng limang 2x2x1 blocks sa first step, then puro orient and permute ata yung nxt (correct me again if im wrong)

meron pa yatang iba?

mejo nagreresearch kasi ako ng mga method sa pagsosolve ng cube kaya so far e yun yung mga nakita ko

try this link

http://www.speedcubing.com/chris/

nasa bandang ibaba yung mga tekniks
hehehe

jestoni143 wrote:@ ynajatrice

hindi po ata extended cross ang petrus method kasi iyon ang ginagamit konbg method... corners first un... albeit the last layer sometimes is oriented in cross....

as far as i know petrus is the basis of extended cross... hmmmmm..

Sa pagkaka-alam ko usefule yung PETRUS method sa Fewest Move Challenge (FMC) yun yung method na kadalasang ginagamit.

Sinubukan ko din yung heise method kasi bukod sa hindi na kailangan ng cross pattern hindi mo rin kailangang mag-memorize ng algo. Purely intuitive yung heise method and yung last step sa pagbuo ng cube using heise is yung pag-gamit ng 3 cycle. Wala ring algo yun ... ok yung mga explanations ni heise para sa akin nakuha ko naman. kaso sa tingin ko kung speedcubing yung pag-uusapan, mas mabilis yung petrus method and cfop.

Pero thanks to Heise method, dahil dun na-modified ko yung fridrich method. Hindi ko na kailangan kabisaduhin lahat ng OLL algos and PLL. Mas naintindihan kong maigi yung concept ng rubiks cube. I'm too lazy to memorize algos.

Mixed and match lang sa mga method, makakagawa ka ng hybrid method, o kaya makakagawa ka rin ng sarili mong method.

ang cross sa CFOP is like a "frame" ng 3x3x2 block or yung first 2 layers na gagawin mo sa you're almost half the job the done

hehehe

petrus nga ba ang basis ng extended cross?

i believe kasi 2x2x2 block din yun e

hehehe

ngaun alam ko na n heise ung second method ok after the natl bukstor method...my current method is fridrich...

haha ntn'l bukstor method.. magic cube..

final fantasy 7 fan? ahhaaha i am a big fan of final fantasy 7... i saw your signature it was Vincent ahahah..

yep.. solid ff7 fan..